Shop

DynaContour

AUTOMATIC POSITION AND TRACTION CONTROL

Product Description

Position and Traction Control improves the tractor performance by continuously adjusting the front hitch in relation to the tractor’s level of slippage.

The operator simply decide, on the control box, when the tractor slippage percentage should be used as maximum reference as well as how much the working depth is allowed to deviate. The control then takes over and automatically activates the lift cylinders as required by the amount of slippage.

The tractor will operate at peak performance thanks to the automatic connection between the slippage level and the front hitch.

The Automatic Position and Traction Control incorporates
settings for «down pressure» and «float».

Automatic Position and Traction Control components:

• Control box in the cab
• Independent Proportional Electronic Valve
• Sensor(s) on the hitch
• Front mounted switch for the hitch
Control box in the cab

Independent Proportional Electronic Valve

Front mounted switch for the hitch

Important
Requires tractor to be equipped with Load Sensing Hydraulic System and ISO bus 11783.

——————————————————————————————-

DynaContour®
> LAFORGE Exclusive

DYNACONTOUR® Ultima takes performance beyond Position and Traction Control, and Weight Transfer System, by adding real time field contour following.

DYNACONTOUR® works by continuously sensing the lenght of the upper link and uses this information to automatically control the position of front hitch.
According to the surface of the field, the length of upper link will increase or decrease. The information is used to
automatically adjust the position of the lower links to assure a constant working depth.

The Weight Transfer completes the device by continuously transferring a portion of the weight of the implement from the gauge wheel(s) to the tractor.

This transfer of weight to the tractor’s front axle improves steering and reduces slippage.

>> The full benefit of DYNACONTOUR® is available without any need for a separate adjustment or control.

DYNACONTOUR® Ultima components:

• Automatic Position and Traction Control
• Weight Transfer Kit with hydraulic upper link
• Front mounted switch for the upper link
• Upper link Sensor

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search